Home » 4.3/10 Attenuator » 4.3/10 Male to Female Attenuator, 2 W, PR2116
4.3/10 Male to Female Attenuator, DC-6 GHz, 2 W, 6 dB PR2116
4.3/10 Male to Female Attenuator, DC-6 GHz, 2 W, 6 dB PR2116

Disclaimer: Actual product colors may vary slightly from the images shown due to different monitor settings and lighting conditions during photo shoots.

PrecisionRF

4.3/10 Male to Female Attenuator, 2 W, PR2116

SKU: PR2116
(0)
$49.00
In stock
Usually ships within 48 hours
Attenuation

Got questions?

Feel free to get in touch

Ask an expert!

Video chat Chat Email +1 254-720-5573

Key Advantages

A 4.3/10 compact in-line male-to-female coaxial attenuator delivering low-value 6 dB padding across DC–6 GHz in a compact in-line 2-watt body. Built around a controlled 50 Ohm resistive element with a bidirectional, reciprocal network that can be installed either way, it provides predictable signal reduction and a well-matched load for RF and microwave test, measurement and system use.

▸ Compact 2-Watt In-Line Body
The small 2 W body installs directly between two cables or at a panel, providing clean attenuation with minimal added length and weight in benchtop and ATE environments.
▸ Low 6 dB Padding for Level Matching
At 6 dB the part provides gentle padding that lowers mismatch interaction and helps stabilise a source, often improving overall VSWR while keeping insertion loss modest.
▸ DC–6 GHz Broadband Rating
The internal element is kept short and controlled to deliver a smooth response across DC–6 GHz, keeping attenuation flat and VSWR low across the lower-to-mid microwave range.
▸ 4.3/10 Low-PIM Threaded Interface
The 4.3/10 interface gives consistent low-PIM contact and good power handling in a smaller footprint than 7/16 DIN, suiting high-density cellular and in-building RF.
▸ Bidirectional – Install Either Way
Bidirectional operation removes orientation concerns on the bench or in production; the same matched 50 Ohm performance is presented in both directions across the operating band.
▸ Tri-Alloy Plated Brass Body
Tri-alloy plating over brass protects the housing and maintains consistent electrical contact in demanding, high-channel-count RF systems.

Applications

This attenuator is widely deployed across RF and microwave systems that demand accurate, repeatable signal-level control and a well-matched 50 Ohm path:

Test & Measurement (VNA / RF Labs) Signal Level & Gain Control Receiver & Front-End Protection 5G / Telecom Infrastructure Aerospace, Defense & Radar SATCOM & Microwave Links Amplifier & Transmitter Matching EMC Test & RF Evaluation

Order by 2PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.

There is $4.99 charge for delivery under $50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.

Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Buy in bulk

Variant Quantity Price Total
1 dB PR2116
$49.00
$0.00
$49.00
$0.00
2 dB PR2117
$49.00
$0.00
$49.00
$0.00
3 dB PR2118
$49.00
$0.00
$49.00
$0.00
4 dB PR2119
$49.00
$0.00
$49.00
$0.00
5 dB PR2120
$49.00
$0.00
$49.00
$0.00
6 dB PR2121
$49.00
$0.00
$49.00
$0.00
10 dB PR2122
$49.00
$0.00
$49.00
$0.00
15 dB PR2123
$49.00
$0.00
$49.00
$0.00
20 dB PR2124
$49.00
$0.00
$49.00
$0.00
30 dB PR2125
$49.00
$0.00
$49.00
$0.00
View cart
0 Total items
$0.00

Product subtotal